Semtech Expands Broad Platform of POL Regulators with Easy-to-Use, 4A Device

SC185 offers programmable soft-start, high integration in tiny 3 x 3 x 0.6mm package with ultra-small design footprint

Camarillo, California - December 07, 2010

Semtech Corp. (Nasdaq: SMTC), a leading supplier of analog and mixed-signal semiconductors, has expanded its point-of-load (POL) regulator platform to include a highly-integrated, 4A output current, synchronous buck regulator with programmable soft-start in a tiny 3 x 3 x 0.6mm package. The new SC185 joins Semtech’s existing platform of POL regulators, which includes a wide selection of output currents ranging from 0.5A to 4A.

The SC185 simplifies power supply design by integrating the regulator, loop compensation components, power MOSFETs and MOSFET drivers on one chip. This high level of integration eliminates the need for external loop stabilization components and programming resistors, allowing designers to easily drop the SC185 onto their PC board, minimizing layout time and effort, with the added benefit of reducing the total board space requirements to an ultra-compact, 89mm2 overall solution footprint. Additionally, the user-programmable soft-start minimizes inrush current to effectively manage overall system power drain.

“Our goal is to provide the most comprehensive range of POL regulators in the industry – from 0.5A to 4A and beyond,” said Alan Burchfield, Senior Product Marketing Manager for Semtech’s Power Management Group. “We listen closely to our customers’ power supply requirements and we are responding with highly integrated, easy-to-use power conversion solutions that help designers meet ‘green’ compliance initiatives and get their products to market on schedule.”

With a very high operating efficiency up to 95%, the SC185 also offers an automatic power-save (PSAVE) mode that maintains high efficiency during light loads. The integrated low RDS(ON) MOSFETs, combined with the PSAVE feature, enable compliance with the increasingly stringent, low standby power consumption requirements of global energy efficiency regulations. The high integration, ultra-small footprint, high efficiency, and design simplicity make the SC185 a simple, space-saving solution for power-efficient POL regulation applications in storage, networking, communications, consumer, industrial and office automation equipment.  

The new SC185 POL regulator features a fixed, 1.5MHz PWM (pulse-width-modulation) switching frequency and accepts input voltages from 2.9V to 5.5V, with output voltages ranging from 1.0V to 3.3V. The device also offers a low, 1µA (typ.) shutdown current and excellent transient response, as well as a power-good indicator to prevent data corruption by holding the system controllers and EEPROM in reset mode until the IC meets known-good regulation. A full range of standard protection functions, including input under-voltage lockout, output over-voltage and current-limit protection, over-temperature protection, and thermal shutdown are also featured.

The 4A SC185 joins Semtech’s existing platform of POL regulators, which covers an expanding range of output currents, including the SC173 (3A) and SC174 (4A) EcoSpeed™ regulators and the SC195 (500mA), SC202 (500mA), SC4626 (1A), SC189 (1.5A), SC283 (1.8A) and SC183C (2A) devices.

Key Features of the SC185

• 4A output current
• Programmable soft-start
• Tiny, low-profile, 16-pad 3 x 3 x 0.6mm MLPQ package with exposed thermal pad 
• Ultra-compact, 89mm2 solution footprint
• Integrated regulator, loop compensation components, MOSFETs and MOSFET drivers
• High operating efficiency up to 95%
• Automatic power-save (PSAVE) to maximize standby efficiency 
• Fast transient response
• 1.5MHz PWM switching frequency

Applications

• Cable Modem:  Switching Regulators
• GPON - Gigabit Capable Passive Optical Network:  Switching Regulators
• HDTV:  Switching Regulators
• Laser Printer:  Switching Regulators
• Notebook PC:  Graphics Memory Controller, I/O Controller Hub, Peripheral Power
• Router and Switch:  Switching Regulators
• Wireless Base Station:  Low Current Power, System Control Processor
• Wireless Node B:  Low Current Power, System Control Processor
• White Goods:  DC Solenoid/Valve Supply

Pricing and Availability

The SC185 is available immediately in production quantities and is priced at $1.60 each in 3,000-piece lots. The ordering codes are:  SC185BULTRT (1.0V), SC185EULTRT (1.2V), SC185HULTRT (1.5V) SC185JULTRT (1.8V), SC185LULTRT (2.5V) and SC185QULTRT (3.3V). The ordering code for starter kits is SC185EVK. Semtech offers comprehensive design assistance, including field- and factory-based support. Data sheets, volume pricing, and delivery quotes, as well as evaluation kits and samples, are available at http://www.semtech.com/info.

About Semtech

Semtech Corporation is a leading supplier of analog and mixed-signal semiconductors for high-end consumer, computing, communications and industrial equipment. Products are designed to benefit the engineering community as well as the global community. The company is dedicated to reducing the impact it, and its products, have on the environment. Internal green programs seek to reduce waste through material and manufacturing control, use of green technology and designing for resource reduction. Publicly traded since 1967, Semtech is listed on the NASDAQ Global Select Market under the symbol SMTC. For more information, visit www.semtech.com.

Press Contact

Pauline Cadena, Public Relations, Telephone: (805) 389-2755